 |
Features |
 |
| • |
Managed via the SNMP Protocol |
 |
• |
Auto-crossover (Auto-MDIX) on twisted pair ports |
| • |
IGMP Snooping & Query Functionality |
|
• |
Wide-range, low-voltage AC or DC powered |
| • |
10BASE-T/100BASE-TX/ 100BASE-FX compliant |
|
• |
Provision for redundant power connections |
| • |
Extended temperature range
–40°C to +75°C |
|
• |
Auto-negotiated or static data rate, duplex and flow control |
| • |
RapidRing® Redundant Ring Technology (recovery in less than 300 ms) |
|
• |
Full- or half-duplex operation on twisted-pair ports |
| • |
Trunking for high-speed
backbone and redundancy |
|
• |
Link/activity/data rate, power and
status LEDs |
| • |
Virtual LAN support |
|
• |
Compact size |
| • |
Quality of Service (QoS) support |
|
• |
Easy panel or DIN-rail installation |
| • |
Programmable fault relay |
|
• |
Industrial environment EMC compatible |
| • |
Port mirroring |
|
• |
CE Mark |
| • |
Field upgradable firmware |
|
• |
UL 508 listed, Industrial Control Equipment |
| • |
Configurable via a web browser or terminal emulation |
|
• |
C-UL listed, CSA C22.2 No. 14-M91, Ind. Control Equip. |
|
Product Overview |
|
The EISX_M Series of compact managed switching hubs provides management
functionality in situations where outdoor temperatures are expected.
Network management is significant in an outdoor scenario because in
many cases the location of the switch or switches may not be easily
accessible, making troubleshooting difficult. The EISX_M Series also
supports Simple
Network Management Protocol (SNMP). Other management
features include VLAN, trunking and Quality
of Service (QoS).
The SNMP agent is comprised of a collection of managed objects that
can be queried by an SNMP manager to indicate the status of the
switch. When this data is displayed, operators and maintenance personnel,
at a central location, can check the entire network by observing
selected devices and detecting potential problems before they occur.
The programmable fault relay can be connected to a supervisory system.
The fault relay can indicate unwanted links or link loss on any
port.
For applications requiring redundancy, the EISX_M family of products
offers RapidRing.
RapidRing allows building a redundant Ethernet network that will
self-heal in less than 300 ms if any segment of the RapidRing is
broken. Redundancy is also possible using trunking.
Configuration is accomplished through a web browser via any Ethernet
port, or through terminal mode via the local console port. Port
parameters are configurable, and device status can be modified and
monitored.
Either straight-through or crossover cables may be used to connect
any of the Auto-MDIX ports to stations or another hub. In addition to one power LED and
one status LED, each port has an LED showing link/activity/data
rate by color: green for 100 Mbps and yellow for 10 Mbps. Flashing
indicates port activity.
The EISX_M Series is shipped with a DIN-rail clip for installation
on TS-35 DIN-rail. If direct mounting on a sub-panel is needed,
an optional panel mounting bracket (shipped with the product) can
be installed after removing the DIN-rail clip.
These features place the EISX_M Series among the most powerful and
versatile Industrial Ethernet switches.
A choice of network
management software is available for use with this switch. Click here to learn about iSNMP™ software. Click here to learn about IntraVUE™ software.
|
More Information |
|
|
Ordering Information |
|
|
