BAS Remote
BAS Router
BAS Ethernet
UL864 Ethernet
Media Converters
Managed
ARCNET
|
 |
Features |
 |
| • |
Compact Size |
 |
• |
Broadcast
storm control |
| • |
10BASE-T/100BASE-TX/100BASE-FX compliant |
|
• |
Full or half-duplex |
| • |
Auto-MDIX
ports |
|
• |
Activity/link
and data rate LEDs |
| • |
Auto-negotiated
data rate, duplex and flow control |
|
• |
Industrial
environment EMC |
| • |
DIN-rail
mountable |
|
• |
CE
Mark |
| • |
Powered
from an unregulated DC power source (10-36V) or from an
AC power source (8-24V, 47-63 Hz). Power is provided through
a quick-disconnect terminal strip. |
|
• |
UL
508 Listed, C-UL Listed Industrial Control Equipment |
|
Product Overview |
|
EISK
switches provide Plug and Play Ethernet connectivity for industrial
automation systems which have unique requirements—convenient
mounting, simple and dependable operation, low-voltage input power
and especially cost-effective. These needs are met by the compact
and rugged EISK5-100T and EISK8-100T, also known as the Skorpion family.
Utilizing
state-of-the art switching technology, EISK switches provide five or eight
10/100 Mbps shielded RJ-45 ports. Each port supports the auto-negotiation
protocol in order to select data rate, duplex and flow control.
For half-duplex links, the Backpressure scheme is used. For full-duplex
links, the PAUSE scheme is supported. All ports are Auto-MDIX
compliant, allowing any port to operate as an uplink port to another
switch, eliminating the need for crossover cables in the field.
All these features require no operator intervention.
Skorpion
Switches address the problem of convenient mounting in control
panels where DIN-rail space is at a premium. Office-grade equipment
is intended for desktop operation and requires a separate power
supply that needs to be powered from a 120/230 Volt AC mains circuit.
In this case, a shelf should be constructed to mount the unit
and a duplex receptacle to be installed inside the control panel.
Skorpion Switches are intended for sub-panel mounting inside the
control panel. Switches are intended for sub-panel mounting and
can be powered from the same control transformer that is used
to power the industrial automation system equipment. Skorpion
Switches can be powered from a low-voltage, wide range AC or DC
power source as well. The activity LEDs on these units face the
technician, thus easing trouble-shooting. The label on the unit
can be written upon so port connections can be documented as to
the location of connected equipment.
The
auto-negotiation protocol allows Skorpion Switches to link with
any compatible 10BASE-T or 100BASE-TX device. They will function
with any application layer that works with Ethernet, including
Modbus/TCP or Ethernet/IP. These units have built-in broadcast
storm control to prevent excess broadcasts from degrading network
performance.
|
More Information |
|
|
738K | |
|
146K | |
|
163K | |
|
296K | |
|
216K | |
|
481K | |
|
Ordering Information |
|
| Copper Models Only |
| Model |
RoHS |
Description |
| EISK5-100T |
 |
Five-port
10BASE-T/100BASE-TX switching hub, DIN-rail mount |
| EISK8-100T |
|
Eight-port
10BASE-T/100BASE-TX switching hub, DIN-rail mount |
| Fiber Plus Copper Models |
| Model |
RoHS |
Description |
| EISK5-100T/FC |
|
Four-port 100BASE-TX/one port 100BASE-SX (multimode) switch w/ SC connectors
|
| EISK5-100T/FT |
|
Four-port 100BASE-TX/one port 100BASE-SX (multimode) switch w/ ST connectors
|
| EISK5-100T/FCS |
|
Four-port 100BASE-TX/one port 100BASE-SX (single-mode) switch w/ SC connectors
|
| EISK8-100T/FC |
|
Six-port 100BASE-TX/two port 100BASE-SX (multimode) switch w/ SC connectors
|
| EISK8-100T/FT |
|
Six-port 100BASE-TX/two port 100BASE-SX (multimode) switch w/ ST connectors
|
| EISK8-100T/FCS |
|
Six-port 100BASE-TX/two port 100BASE-SX (single-mode) switch w/ SC connectors
|
| Accessories |
| Model |
RoHS |
Description |
|
AI-XFMR |
|
Wall-mount plug-in transformer
120 VAC (nom) input/24 VAC (nom) output (details...) |
|
AI-XFMR-E |
|
Wall-mount plug-in transformer
230 VAC (nom) input/24 VAC (nom) output (details...) |
|
