BAS Remote
BAS Router
BAS Ethernet
UL864 Ethernet
Media Converters
Managed
ARCNET
|
 |
Features |
 |
| • |
10BASE-T/100BASE-TX/ 100BASE-FX compliant |
 |
• |
Provision for
redundant power connections |
| • |
Shielded RJ-45
or SC/ST-style fiber optic connectors |
|
• |
LEDs for link/activity,
data rate, power and loop detection |
| • |
Auto-negotiated
data rate, duplex flow control on twisted-pair ports |
|
• |
Easy DIN-rail
installation |
| • |
Full- or half-duplex |
|
• |
Industrial
environment EMC compatible |
| • |
Broadcast storm
control |
|
• |
CE Mark |
| • |
Multimode or
single-mode fiber |
|
• |
UL 508 and UL 1604 Class I, Division 2 Listed |
| • |
Wide-range,
low-voltage AC or DC powered |
|
• |
UL 864 Recognized (select models) |
|
Product Overview |
|
UL 864 requirements cover electrical control units and accessories for
fire-protective signaling systems employed in ordinary indoor locations in
accordance with these standards of the National Fire Protection Association:
NFPA 12 — Carbon Dioxide Extinguishing Systems
NFPA 12A — Halogenated Extinguishing Agent Systems Halon 1301
NFPA 13 — Installation of Sprinkler Systems
NFPA 15 — Water Spray Fixed Systems for Fire Protection
NFPA 16 — Installation. of Foam-Water Sprinkler & Spray Systems.
NFPA 17 — Dry Chemical Extinguishing Systems
NFPA 17A — Wet Chemical Extinguishing Systems
NFPA 70 — National Electrical Code
NFPA 72 — Installation, Maint. & Use of Protective Signaling Systems
NFPA 92A — Recommended Practice for Smoke-Control Systems
NFPA 92B — Guide for Smoke Mngt. Sys. in Malls, Atria, & Large Areas
NFPA 2001 — Clean Agent Fire Extinguishing Systems
The EIS Series of switching hubs for Industrial Ethernet includes
two models that qualify as Control Unit Accessories for fire-protective signaling
systems. The EIS8-100T provides eight twisted-pair ports that use shielded
RJ-45 connectors. For industrial applications requiring a fiber backbone,
the EIS6-100T/FT offers four such ports plus two fiber-optic ports that use
ST connectors — combining switching technology and fiber optics when
longer networking distance or immunity to EMI/RFI is important. These
benefits result in decreased downtime, fewer outages and improved reliability.
UL 864 Certification for these models can be viewed here.
EIS switches segment the Ethernet network into separate collision domains.
Each functions as a "bridge" between various data links, creating
a larger network diameter than can be achieved with repeating hubs. Each
port automatically negotiates with its attached device the data rate (10 or
100 Mbps) and duplex (full- or half-) for that port. The flow control
mechanism is also negotiated. For Full-duplex segments,
the PAUSE scheme is used. For half-duplex segments, the backpressure
approach is automatically invoked. Table port locations of Ethernet devices
are aged to automatically accommodate changes to the field wiring. If a broadcast,
multicast or unicast transmission to an unknown destination is received
on a port, all other ports are flooded with the transmission.
Both models feature wide-range,
low-voltage AC or DC power requirements and jumper-selectable broadcast storm
protection. They can be DIN-rail or panel mounted. To aid troubleshooting, each
model provides LED indicators for data rate, activity, link integrity, power and
loop detection.
|
More Information |
|
|
Ordering Information |
|
| Copper Model Only |
|
Model |
Description |
Quote |
Buy |
| EIS8-100T |
Eight-port 10BASE-T/100BASE-TX
switching hub |
|
|
| Fiber Plus Copper Model |
| EIS6-100T/FT |
Four-port 100BASE-TX/two-port 100BASE-FX (multimode) switching hub with ST connectors |
|
|
|
Accessories |
|
Model |
Description |
|
|
|
AI-XFMR |
Wall-mount plug-in transformer 120 VAC (nom) input/24 VAC (nom) output (details...) |
|
|
|
AI-XFMR-E |
Wall-mount plug-in transformer 230 VAC (nom) input/24 VAC (nom) output (details...) |
|
|
|
